Steps to Fix Error Code 0XC00000E9 on Windows 10

Steps to Fix Error Code 0XC00000E9 on Windows 10
January 21, 2020 No Comments Window 10 John Crist

This error 0xc00000e9 comes up when the user tries to boot into a device. Windows generally display the error as “Your PC needs to be repaired” or “An unexpected error has occurred.” Windows generally throw this error code when it is unable to locate the right file for booting.

To be more specific it is unable to find the BCD, explained as boot configuration data. This file is responsible for guiding the PC through the boot process.

Causes of Windows 10 Error Code 0xc00000e9

  1. Corrupted or damaged Hard Disk Drive.
  2. Improperly or loss connection of hard disk wires.
  3. Damaged or corrupt USB or DVD.
  4. Faulty Windows updates.
  5. Junk or Misconfigured or corrupt registry files.
  6. Outdated System drivers.

All the above-given points are the main possible causes of 0xc00000e9 Unexpected I/O error. There is more than one cause of this error, so we need to apply several methods to resolve this error.

This blog includes all the tricks and methods to deal with the system files, HDD errors, hardware troubleshooting and more.

How to Fix Error Code 0xc00000e9 Windows 10?

1-888-294-8062 Windows Support

0xc00000e9

Fix 1: Modify Bios Settings

I’ve listed this solution at the top because it is very effective to fix error code 0xc00000e9. By resetting BIOS or set it to its default configuration you can overcome this irritating error message.

  1. First of all, press the reboot button and when the logo screen appears then keep pressing F2, DEL or F10 Key (it depends on the system). This will open up the BIOS settings window.
  2. Choose “Load Optimal Defaults”
  3. Now, go to the PC’s HDD setting configuration present under the “Advanced” section. Now, you need to reconfigure the setting to either AHCI or IDE.
  4. After it, save the settings and then reboot your computer. Check for the error, it is hoped that after applying this solution properly you will never face this error.

NOTE: You should try both the options AHCI and IDE one by one. If AHCI did not work then apply IDE or IDE not work then go for AHCI.

Fix 2: Make Sure that your System’s SATA Cables are Connected Properly

If you are using a PC not a laptop then you should check the older SATA cables of your PC. Make sure it is in working condition and connected properly.

But, if you are using an older SATA cable OR connected a SATA II cable with a SATA III port and hard drive then the system will never provide a sufficient data transfer rate.

Call 1-888-294-8062 Windows Support Team:

If this is the case then the OS gets unable to communicate properly with the connected HDD and trigger this error code. Follow the below-given steps carefully;

  1. Shut down your computer and disconnect the power cable.
  2. Open the CPU case and find the hard drive, and the SATA port.
  3. Now, you need to replace the OLD cable with a NEWER one.

This step is only for those users who have experience in dealing with the internal hardware connectivity scenarios.

About The Author
John Crist Geeks Idea is a technical blog. Here you will find the tips and tricks to fix the problem with the printer, router, antivirus, and computers.

Leave a reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.